17
Engli
sh
Clean the shaver with water or with the
cleaning brush once per month. (See
pages 17 to 19.)
The main unit neck section (
a
), trimmer,
system outer foil gaps, etc. cannot be
cleaned with the self‑cleaning recharger.
Changing the mode of self-cleaning recharger
The “Charge” mode starts when attaching the shaver,
and the mode can be changed by pressing the
SELECT button.
Charge mode
(Charge)
AUTO mode
(Clean/Dry/
Charge)
Dry/Charge
mode
(Dry/Charge)
Notes
•Do not press the cleaning liquid unit removal button
during cleaning as the cleaning liquid may spill
causing a malfunction.
•The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under
extreme low temperatures (approximately 0 °C or lower).
•A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
Cleaning thoroughly
Cleaning with water
•Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and
some water to the system
outer foil�
2
Press for more than
2 seconds to activate the
sonic vibration cleaning
mode�
•Splashing of foam is
suppressed.
•The lamps blink alternately.
•After about 20 seconds, it will be automatically
turned off, or you can turn it off by pressing the
power switch.
3
Remove the outer foil
section and clean with
running water�
•See page 19 for removing
the outer foil section.
•Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
