Panasonic ES-LF70, Руководство по эксплуатации

Страница: 25 / 32

25
English
Follow the steps outlined below if the
status lamp blinks or glows
Blinks Glows
Correctly set the
detergent cartridge and
then restart a course. Remove the shaver from the self-
cleaning recharger and then check that
the [CLEAN] lamp has gone out. (Be
careful as the blade may be hot or wet.)
Check that the water tank is correctly
attached, the water tank cap is
securely closed and the self-cleaning
recharger is placed horizontally.
If the status lamp
goes out
Continue a course.
When an abnormality
has been corrected When no abnormality
was found
Remove the AC adaptor
from a household outlet. It is time to replace the detergent
cartridge and cleaning liquid
inside the water tank. Wash
away the old cleaning liquid and
then rinse the water tank and
then refill it with water. Replace
the old detergent cartridge and
then restart the course.
When the status lamp
goes out When the status lamp
glows again
Continue a course. Contact an authorized
service center.

Course Time required (guide)

Charge
Charge
0 to 60 min
 Clean/
Dry/
Charge
Clean
10 min
Dry
80 min
(170 min*)
Charge
0 to 60 min
It is not possible to change the course after
the “Clean/Dry/Charge” course has started. •
 Dry/
Charge
Dry
180 min
Charge
0 to 60 min
It is possible to change to the “Clean/
Dry/Charge” course even after the “Dry/
Charge” course has started. •
* When the ambient temperature of the self-cleaning
recharger is low (approx. 15 °C or lower), the time it
takes to dry the shaver increases.
The Clean or Dry function may stop under extreme low
temperatures (approx. 0 °C or lower). In such a case,
the CLEAN and DRY lamps will blink when the “Clean/
Dry/Charge” course is selected, or the DRY lamp will
blink when the “Dry/Charge” course is selected. •
'5.(A%*KPFD