10
►
Replacement parts
Replacement part is available at your dealer or Service Center.
Replacement parts for ER‑GP81 Blade
WER9900
• Do not use any blade other than the one dedicated as it may
cause defect in performance.
Cleaning the charging stand
Use the cleaning brush to clean hair trimmings and dust in the
charging plug or in the hole on the bottom surface.
Troubleshooting
Problem
Action
The clipper has become blunt.
Charge the clipper.
(See page 6.)
Clean the blade and apply
lubrication oil.
(See pages 8 and 9.)
Replace the blade.
(See pages 8 and 10.)
Clipper stopped functioning.
Charge the clipper.
Or use with the AC operation.
(See page 6.)
Problem
Action
The clipper cannot be charged.
Push the main body into the
charging stand or appliance
plug all the way.
Charge within the
recommended charging
temperature of 10 °C to 35 °C.
Clipper can be used for only
about 10 minutes even after
charging.
Have the battery replaced by an
authorized service center.
Makes a loud sound.
Confirm that the blade is
properly attached.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorised by Panasonic for repair.
Frequently asked questions
Question
Answer
Will the battery deteriorate if
not used for an extended
period of time?
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
Can the battery be charged
before every use?
The clipper uses a lithium ion
battery, with the charging
current controlled, so there is no
problem with battery life.
ER-GP81_AUS.indb 10
2017/10/11 13:59:22
