Panasonic ER-GK60-S, Руководство по эксплуатации

Страница: 14 / 52

14
English
Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade.
2
Apply a drop of the oil to
each indicated point.
3
Attach the blade to the main
body, turn on the power and
allow to run for
approximately 5 seconds.
► Replacement part
Replacement part is available at your dealer or Service Center
Replacement part for ER‑GK60 Blade WER9500
Removing and mounting the blade
Removing the blade
Hold the trimmer and push the blade
with your thumb.
Mounting the blade
Fit the mounting hook (
B
) into the blade mounting (
A
) on the
trimmer and then push in until you hear a click.
A
B
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorized by Panasonic
for repair.
Problem Action
Makes a loud sound.
Apply oil. (See this page.)
Confirm that the blade is properly
attached.
The trimmer has
become blunt.
Trimmer stopped
functioning.
Operating time is short.
Until problems are solved, please
follow each procedure as follows;
1. Charge the trimmer.
(See page 9.)
2. Clean the blade and apply oil.
(See pages 13 and 14.)
3. Replace the blade.
(See this page.)
4. Contact the store where purchased.
Charge the battery for approximately
30 hours continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached the
end of its life. (Fluid may be leaking
due to degradation at the end of
battery life.)
Contact an authorized service center
for repair.
The trimmer cannot be
charged.
Mount the main body firmly on the
charging plug, and make sure the
charge indicator lamp glows.
PB014575 - ER-GK60 �������01EN_03-29-17.indd 14 2017/3/29 10:09:11