15
English
3. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See this page.)
5. Attach the attachment and blade
to the appliance.
With the brush
1. Remove the attachment and blade.
2. Brush off any hair trimmings from
the main body and from around the
blade.
3. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
4. Apply the oil to the blade. (See this page.)
5. Attach the attachment and blade to the appliance.
Lubrication
• Apply the oil to the blade before and after each use.
1
2
3
Remove the blade.
(See page 16.)
Apply a drop of the oil to
each indicated point.
Attach the blade to the main
body, turn on the power and
allow to run for approximately
5 seconds.
►
Replacement parts
Replacement part is available at your dealer or Service Centre.
Replacement part for
ER-GB96/ER-GB86
Blade
WER9620
Lubrication oil WES003P
• Do not use any blade other than the one dedicated as it may
cause defect in performance.
• We recommend Panasonic lubrication oil WES003P.
ER-GB96_86.indb 15
17/12/13 下午2:31
Содержание ER-GB86
Страница 36: ...36 ER GB96_86 indb 36 17 12 13 下午2 31 ...
Страница 248: ...248 ER GB96_86 indb 248 17 12 13 下午2 33 ...
Страница 282: ...282 MEMO ER GB96_86 indb 282 17 12 13 下午2 34 ...
Страница 283: ...283 MEMO ER GB96_86 indb 283 17 12 13 下午2 34 ...