Panasonic ER?GB50, Руководство по обслуживанию

Страница: 7 / 11

7
4.2. Assembly Instructions
For assembly, reverse the order of disassembly.
1. Insert the rechargeable battery into the battery holder.
NOTE:
Make sure to attach the washer and O-ring to the bat-
tery terminal. The O-ring for the battery terminal is the
thickest. Confirm if the O-ring is attached properly.
• Battery terminal : washer x 1and O-ring x 1
• terminal pins: o-ring x 1
2. Set the motor holder first, then set the module assembly
with rechargeable battery.
NOTE:
Make sure that two motor lead wires are set within the
space between the battery holder and the motor
holder to prevent pinching.
NOTE:
Make sure to attach the switch cam with the lowest
position.
Apply the grease (G741S) on the housing O-ring.
3. Fix the motor holder in housing A with two screws.
NOTE:
Make sure that two O-rings are set.
4. Set the front panel.
NOTE:
Hook the bottom side first and fix the front panel.
Make sure to set the switch handle to the "0" position.
5. Set the click spring.