12
English
• If the remaining battery is too low, the blades may
move slowly or stop, even with the AC operation. In
this case, charge the battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
How to use
(Illustration: ER‑HGP84)
• Check that the blades are not damaged or deformed
before use.
• Turn the appliance off.
• Apply the lubrication oil to the blade before and after
each use. (See page 14.)
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
1
Set the trimming height.
2
Press the power switch to turn on the appliance.
Setting the trimming height
For a trimming height of
0.8 mm to 2.0 mm, turn the
dial to the desired height.
Use an attachment for a
trimming height higher than
3 mm or more.
1.4
Trimming
height
indicator
0.8
1.1
1.4
1.7
2.0
Removing and mounting the comb attachments
►
Mounting the attachment
1. Select the trimming heights
indicated on the insides and
sides of the attachments.
2. Set the dial to “0.8” and then
mount the attachment to the
main body as illustrated.
0.8
0.8
►
Removing the attachment
Slide one side of the attachment
off the mounting in direction
indicated with the arrow.
Care
(Illustration: ER‑HGP84)
Removing and mounting the blade
• Turn the appliance off.
►
Removing the blade
Hold the main body with the
switch facing upward and
push the blade with your
thumb while catching the
blade in your other hand.
