10
English
Removing and mounting
the blade
To remove the blade, hold the head, place your thumb
against the blades and then push them away from the head.
(Fig. 7‑
1
)
To mount the blade, fit the mounting hook (
d
) into the
blade mounting on the head (
c
) and then push in until
you hear a click. (Fig. 7‑
2
)
Replacement parts
Blade: once every three years
Replacement part is available at your dealer or Service Centre.
Blade
WER9605
Lubrication oil
WES003P
Lubrication
• Apply the lubrication oil to the blade before and after each use.
1
Remove the blade.
2
Apply a drop of the lubrication oil to each indicated point.
(Fig. 8)
3
Attach the blade to the head, turn on the power and
allow it to run for approximately 5 seconds.
Troubleshooting
Problem
Action
The appliance has
become blunt.
Operating time is short.
Appliance stopped
functioning.
Until problems are solved, please
follow each procedure as follows;
1. Charge the appliance.
2. Clean the blade and apply
lubrication oil.
(See pages 9 and 10.)
3. Replace the blade.
(See this page.)
Makes a loud sound.
Clean the blade and apply
lubrication oil. (See page 9.)
Confirm that the blade is properly
attached.
If the problems still cannot be solved, contact your dealer or a
service centre authorized by Panasonic for repair.
Specifications
Airborne Acoustical Noise
66 (dB (A) re 1 pW)
This product is intended for household use only.
Содержание ER-CTW1
Страница 1: ...Operating Instructions Household use Trimmer Head Model No ER CTW1 ...
Страница 2: ...2 P 3 1 2 3 4 5 6 7 8 ...
Страница 3: ...3 4 1 2 3 4 ...