Panasonic ER-CA70, Руководство по эксплуатации

Страница: 11 / 16

Cleaning the blade
If washing in water
Warning - Detach the hand held part from the power cord
1. Rinse off any hairs
sticking to the blade
and any hairs inside
the clipper.
2. Shake the clipper 4 or 5
times gently, wipe off any
water drops from the
clipper and blade, and
then let it dry onto a towel
with the “washable”
indicator facing upward.
If cleaning with brush
1. Brush off
any hairs
from the
clipper and
from around
the blade.
2. Remove the
blade and
brush off
the hairs
from the
blade edge.
3. Brush the hairs out
from between the fixed
blade and the moving
blade while pressing
down on the lever for
cleaning to raise the
moving blade.
►
►
After cleaning the blade with water or brush
1. Apply a few drops of the oil to the points
indicated by the arrows.
2. Remount the blade on the clipper.
Apply the oil to the clipper after use.
Otherwise the blades may become
dull, make abnormal noises, or becomes
hot and lead to the deterioration of cutting
performance.
•
Removing the buili-in rechargeable battery
Remove the battery as illustrated.
removing the battery.
after removing it.
►
Disconnect the clipper from the AC adaptor when 1.
Fully discharge the battery. 2.
disattach the battery
Disassemble hand held part as illustrated (
①-③
) then 3.
Be careful not to short the + and - terminals of the battery 4.
ER-CA70_CH.indb 6 2009/01/14 11:23:43
English
before cleaning it in water.