background image

6

How to remove the built-in

rechargeable battery before dis-

posal of the trimmer

The battery in this trimmer is not
intended to be replaced by con-
sumers. However, the battery may be
replaced at an authorized service
center. The procedure described
below is intended only for removal of
the rechargeable battery for the pur-
pose of proper disposal.
1. Disconnect the power cord from

the AC outlet, and remove the
power cord from the trimmer.

2. Remove the blade from the trim-

mer. Remove the 4 screws (a).
(see fig. 10)

3. Remove the body cover (hous-

ing). (see fig. 11)

4. Remove the battery. (see fig. 12)

Attention

B

Do not charge the trimmer at tem-
peratures below 5°C (41°F) or
above 35°C (95°F), or where it will
be exposed to direct sunlight or
other heat sources.

B

Clean the housing only with a soft
cloth slightly dampened with water
or soapy water. Never use a caus-
tic cleaner such as benzene or
bleach.

B

Never immerse the trimmer in
water.

B

The trimmer may become warm
during operation and normal
recharging. This is normal.

Caution

1. Do not use the trimmer near or

over basins filled with water.

2. Never use it with wet hands.
3. Keep out of reach of children.
4. Never tamper with the moving

parts.

5. Do not pick up the trimmer by the

cord. It may become detached,
causing damage or injury.

6. Do not use on animals.
7. Never disassemble the trimmer.

Take it to a qualified serviceman
when service or repair is required.

8. Do not attempt to use any power

cord or adapter other than one
specifically designed for this
model. Use only adapter RE9-55.

Warning

Keep the trimmer dry.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of experi-
ence and knowledge, unless they
have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.

Specifications

Power source: See the name plate

on the product.

Motor voltage: 1.2V DC
Charging time: 8 hours

 P00-15(ER206)AR  2010.02.25 16:17  ページ 6

7

 P00-15(ER206)AR  2010.02.26 15:57  ページ 7

Refine_10-02-26

 16:03:39

Refine_ER206.7.p1.pdf

Refine_ER206.6.p1.pdf
Refine_10-02-25

 16:21:01

B520859_ER206-chukinto_Tori

4

 10-02-26

 16:05:30

Отзывы: