49
48
4. Sit back in the seat as far as possible with your head on the pillow (back cushion,
backrest).
After pressing
the seat will automatically recline to the massage position and body searching will commence.
• You will feel a light tapping sensation on your shoulders. Always check the shoulder position and when necessary adjust it
manually.
After body searching has been completed the massage will begin.
• The air massage on the lower body will commence at the same time that body searching commences. (If the legs has not
been selected then the air massage will not commence.)
• You can freely adjust the angle of the backrest and legrest.
• Slide the legrest to adjust the position of your knees and calves. (See extending the legrest on Page 47.)
5. After the massage has been completed the unit will automatically stop.
After the designated program has been completed the unit will automatically stop. The usual program takes about 15
minutes.
• If you want to stop the massage during a program press
. Press
if you want to stop the massage immediately.
Self Program Example
“My shoulders and lower back are a bit sore today so I think I’ll focus on those areas.”
(1) I just want a light
massage on my
neck so I’ll set
this at 1.
(2) My shoulders are
really stiff so I’ll
set this at 5.
(3) My back’s fine so
I’ll set this at 0.
(4) My lower back
feels pretty stiff
so I’ll set this at 4.
(5) I just want a light
massage on my
legs so I’ll set this
at 1.
1
5
0
4
1
Press
Degree of Fatigue
Press
Press
Press
Press
WHEN YOU WANT TO CREATE YOUR OWN MASSAGE PROGRAM (SELF PROG.)
Degree of Fatigue Display
• This is used in the Self Program to
indicate how tired you are in each
area of your back and legs.
Program Strength Display
• This displays the strength of
the selected program.
Please ensure that the cover
is closed securely.
Pressure Level Display
• This displays the amount of
pressure exerted on the body.
Neck Roller Position
Button
• Pressing this button allows
you to adjust the shoulder
position after body searching
has been carried out.
Movement Display
• This displays the program
that is currently in use.
1
2
3
Display of Massage Areas
• The massage points currently
being massaged flash.
1. Press .
• Programmed Operation buttons (four) and the Self Program buttons will start to flash.
2. Press .
• The Degree of Fatigue indicators on the display will all start to flash on the neck area.
• The massage heads will not start to move until you press
.
* It is not possible to use the Self Program if the cover of the control panel is not completely closed.
3. Select the degree of Fatigue.
(1) Press location
to select the desired area of the body. The button will toggle down each time you press it.
(2) Press fatigue
to select the degree of fatigue.
(3) Press
after you have finished inputting settings for the various parts of the body.
The massage lounger will automatically create the massage program best suited to the information you have input.
Your selections will not be recorded until you have pressed
.
—— NECK
—— SHOULDER
—— BACK
—— LOWER BACK
—— LEGS
• The area of the body selected will start to flash.
The degree of fatigue will decrease as you continue to
press the button.
After reaching the minimum setting, if you press the
button again it will return to the maximum setting.
The greater your selection, the more time and movement
will be spent on that area. (See Page 51 for examples.)
