background image

19

1. Check that there is nothing under the

Backrest or the Legrest.

RETURN THE SEAT TO THE ORIGINAL POSITION

AFTER COMPLETING THE MASSAGE

Check that

there is nothing

here

Check that

there is nothing

here

2. Return the seat to the Upright position.

• When returning the seat to the upright position, as it may

take some time for the massage heads to return to the
retracted position, please continue to press the Reclining
Button until the seat is fully upright.

reclining

Closing the leg 
massager

3. Place the controller in its pocket

• Using the controller pocket as a grip to help you stand up

can place excessive force on the pocket, which can cause
it to rip.  Please refrain from doing so.

4. Return the center cushion to its original

position.

Press

• The leg massager has two functions. 

The massager can also massage the soles of the feet.

1. Press button

• The programmed operation and leg massage button will flash.

2. Press the Leg Massage button

• The leg massage will start.
• The speed of the massage will be displayed.
• It is possible to adjust the reclining angle during the massage.

3. Adjusting Massage Speed

• Leg massage intensity can be adjusted in 2-stages.

4. Leg Massage Auto Stop 

• A timer will automatically stop the unit approximately 15

minutes (15–17 minutes) after the massage started.  

• If you want to start another massage, please press 

button.

5. STOPPING MANUAL OPERATION

Press 

button to stop the leg massage.

18

LEG MASSAGE IN MANUAL OPERATION (EP1061)

slow

fast

leg massage

slow

fast

leg massage

slow

fast

leg massage

slow

fast

leg massage

slow

fast

leg massage

slow

fast

Off

Press

Press

Press

Press

Soles of feet

Calves

• If your calves are not in the correct position in the legrest, please adjust your legs so that they are.  

1. Press button

• The programmed operation and leg massage button will flash.

2. Press the Leg Massage button

• The air massage will start.
• The strength of the massage will be displayed.
• It is possible to adjust the reclining angle during the massage.

Air will be released from the legrest while the Reclining Button
is pressed.  Adjust the position of your legs during this time.

3. Adjusting Massage Intensity

• Leg massage intensity can be adjusted in 2-stages.

4. Leg Massage Auto Stop 

• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.  
• If you want to start another massage, please press 

button.

5. STOPPING MANUAL OPERATION

Press 

button to stop the leg massage.

• It will take some time before all the air escapes from the leg massage unit.

(Air will continue to escape even after 

button has been pressed.)

LEG MASSAGE IN MANUAL OPERATION (EP1260)

gentle

strong

leg massage

gentle

strong

leg massage

Press

gentle

strong

leg massage

gentle

strong

leg massage

gentle

strong

leg massage

Gentle

Strong

Off

Press

Press

Press

NOTE:

(EP1061) DO NOT sit on or get off the lounger by standing on the legrest while it is folded down. 
Always remove your feet from the massager prior to standing.
(EP1260/EP1061) Integrated Timer to Prevent Overuse.
• An integrated timer prevents over use of the unit.
• When using manual operation, the timer automatically stops operation after 15 minutes (15–17 minutes).

* If you want to continue to use the unit, please ensure that you have a break of at least 10 minutes

between massages to allow your body to rest.

Содержание EP1061 - MASSAGE LOUNGER
















Отзывы: