Panasonic EP-MA73 страница 45 Скачать руководство пользователя

Страница: 45 / 88

9.4.

Removing the Leg covers
(right/left)

1. Remove the Armrest.
2. Remove the Side cover.
3. Remove three screws each on right/left sides installing

the Leg cover and the Frame, and one screw each on
right/left installing the Inside cover and the Frame.

Caution

• When tightening screws installing the Leg cover and then

Inside cover, be sure to have the Leg cover inside and the
Inside cover outside.

• When installing the Leg cover, fit the Leg cover into the

Frame and slide it backward so that hooks fit together.

9.5.

Removing the Leg cover back

1. Remove two screws fixing the Leg cover.

Caution

• Install the Leg cover back first before installing the Leg

cover right/left.

2. Pull off a pin and a snap pin each on right/left sides fixing

the Castor, and remove the Castor.

Caution

• Be careful of the directions of the snap pin when install-

ing it.

9.6.

Removing the Rear cover

1. Remove four screws on the Rear cover top and two

screws on the Rear cover bottom, and pull out the Rear
cover top.

Caution

• Remove the bottom screws first when removing screws.

Содержание EP-MA73

























































































Результаты поиска

Содержание EP-MA73

Отзывы:

Похожие инструкции для EP-MA73

Бренды по названию

Популярные бренды

Panasonic EP-MA73, Руководство по обслуживанию

Результаты поиска

Содержание EP-MA73

Отзывы:

Похожие инструкции для EP-MA73

Бренды по названию

Популярные бренды