PAN1322-SPP
ENW89841A3KF
User’s Manual
8
Revision 1.3, 2013-08-14
Hardware Description
General Device Overview
1
General Device Overview
1.1
Features
General
•
Complete Bluetooth 2.1 + EDR solution
•
Implements a single point-to-point data link to other
SPP capable Bluetooth devices
•
Ultra low power design in 0.13
μ
m CMOS
•
Temperature range from -40°C to 85°C
•
Integrates ARM7TDMI, RAM and patchable ROM
•
On-module voltage regulators. External supply 2.9 - 4.1 V
•
On-module EEPROM with configuration data
•
On-module tuned reference clock
•
Module can enter low power mode in idle state and during sniff intervals
Interfaces
•
AT command interface over UART with HW flow control
•
Default UART baudrate 115200 bit/s
•
Module configuration reprogrammable for 9600 bit/s up to 3.25 Mbit/s UART baudrate
•
JTAG for boundary scan in production test
RF
•
Class 2 device up to +4 dBm
•
Receiver sensitivity typ. -86 dBm
•
Integrated antenna, balun and ISM band filter
•
Integrated LNA with excellent blocking and intermodulation performance
•
Digital demodulation for optimum sensitivity and co-/adjacent channel performance
Bluetooth
•
Bluetooth V2.1 + EDR compliant
•
Secure Simple Pairing
•
Device A (initiating link) or Device B (accepting link) role supported
•
Single point-to-point data link, role switch supported
•
Packet data mode and stream data mode supported
•
Sniff mode and Sniff Subrating is supported with above capabilities
•
5 trusted devices stored in EEPROM
•
SW version available to configure specific RF certification tests
