English
How to use the hair dryer
1
1
Select whether to have nanoe™ or not with the
nanoe™ switch (
F
).
2
2
Select the temperature of the airflow with the
temperature selector (
L
).
3
3
Select the intensity of the airflow with the main
switch (
K
).
Notes
nanoe™ is produced when the main switch (
K
) is set to
position 1 to and the nanoe™ switch (
F
) is set to .
nanoe™ is invisible to the naked eye.
If you are worried about hair damage, set the switch to
“1: Set (Gentle airflow)” before use.
If you want to dry your hair quickly, set the healthy quick
drying nozzle (
M
) in the direction shown in the illustration.
Drops of water may blow out of the nanoe™ outlet (
C
) during
use, but this is not a malfunction.
A humming noise may come out of the nanoe™ outlet (
C
),
but this is the sound of nanoe™ being discharged and is not a
malfunction.
The effects of nanoe™ might not be felt by the following
people. People with crimpy hair, strong curly hair, very smooth
hair, short hair, or who have had a hair straightening perm in
the last three or four months.
•
•
•
•
•
•
•
About nanoe™
What is nanoe™?
(nanoe™ generation method: High-voltage discharge)
nanoe™ is charged fine water particles, generated by applying
high voltage in order to split water. Its diameter is smaller than
1/100 of steam (approx. 6000-8000 nm), and it cannot be seen
with the naked eye. Since nanoe™ is generated by collecting
water in the air, it may be difficult to generate in certain cases
depending on the environment.
(It is harder to collect water in the air when it is cold and
humidity is low.)
How nanoe™ works
Generally hair has properties which make it easy to become
positively charged with electricity. These properties attract
strongly negatively charged nanoe™ which penetrates the hair
with moisture. Furthermore, they make the hair slightly acidic,
tighten cuticles and keep your hair strong, elastic and healthy.
nanoe™ charge panel
When nanoe™ continues to strike hair, hair becomes
negatively charged. As a result, the nanoe™ and negatively
charged hair repel each other, making it difficult for nanoe™ to
reach hair.
With the nanoe™ Charge System, by just gripping the panel
together with the handle, the negative charge accumulated on
hair is released.
Because of this, nanoe™ continues to penetrate into hair,
supplying moisture and thoroughly moistening down to the tips
of hair.
