Panasonic EH-KN8C, Руководство по эксплуатации

Страница: 8 / 34

8
English
Parts identification
A
B
C
D
E
K
J
H
F
L
N
M
I
G
A
Air outlet
B
Attachment release
button
C
Cool Shot switch
D
Power switch
: Dry mode
: Set mode
: Off
E
Dual voltage switch
F
Plug
(The shape of the plug
differs depending on the
area.)
G
Cord
H
Air inlet (filter)
I
Ion charge panel
J
nanoe™ lamp
K
nanoe™ outlet
L
Wide Blow brush
M
Roller brush
N
Salon Blow brush
Fixing the attachment
Turn the power switch OFF when attaching and removing
attachments.
Mounting the attachment
Align the attachment with the hair styler
as shown. Ensure that the groove of the
attachment and the hook of the body are
aligned with each other. Insert the hair
styler in the attachment until it clicks.
Removing the attachment
Press the attachment release button and pull out the attachment
to remove it.
About dual voltage switch
The dual voltage switch is set to
[220‑240 V] at the time of shipping.
[For regions with 100-120 V]
Do not use a power supply voltage of 220‑
240 V with the dual voltage switch set to
[100‑120 V].
A malfunction may result. The heater will
overheat and the safeguard will be triggered to stop hot air flow.
Be sure to turn the power switch OFF.
[For regions with 220-240 V]
If a power supply voltage of 100‑120 V is
used with the dual voltage switch set to
[220‑240 V], the airflow will not be sufficient
for drying or setting.