Panasonic EH-HV70, Руководство по эксплуатации

Страница: 17 / 68

17
English
Troubleshooting
Problem Possible cause Action
•
Sparks are generated inside the Ion Outlet.
•
The Ion Outlet emits a noise (crackling
noise).
Dust, styling products, etc. are adhered
to the pin-shaped portion where ion is
generated.
Clean the Ion Outlet to
remove any adherents.
When the temperature is set to [230], [200],
or [180] it blinks alternately between
230 °C, 200 °C, or 180 °C and 160 °C.
It is on standby mode.
When resuming use, press
the [+] or [-] temperature
setting switches and return
the temperature setting to
230 °C, 200 °C, or 180 °C.
All temperature setting lamps keep blinking.
Please request an inspection or
repair from place of purchase.
It takes time to reach operating temperature.
The time to reach operating temperature
(approximately 100 °C) differs depending
on the area.
100 - 120 V: about 40 seconds
220 - 240 V: about 15 seconds
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifications
Power source
100 - 120 V 50 - 60 Hz 220 - 240 V 50 - 60 Hz
Power consumption 41 W 43 W
Iron temperature Approx. 130 °C to 230 °C
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a
representative period.
This product is intended for household use only.