4. Disassembly and Assembly Instructions
4.1 Disassembly Instructions
1. Insert a small flat head screw driver
3. Remove the spring by pull out the Housing side
into the groove of the Shaft Cover
and Press plate side as shown in Figure 6.
as shown in Figure 4.
(Figure 6)
4. Using a screw driver remove the two tapping screw
from Press plate cover as shown in Figure 7.
※
Be careful not to lose the spring
※
.
(Figure 4)
(Figure 7)
2. Remove the Shaft screw and take off the Shaft
5.Take off the Press plate cover as shown in Figure 8.
from Main body as shown in Figure 5.
(Figure 5)
(Figure 8)
Shaft Cover
groove of Shaft Cover
groove of Shaft Cover
Shaft
Shaft screw
Spring
Pull
Pull
Tapping Screw
Spring
Press plate Cover
