Operation
To use all features
Control Panel
Temperature setting and a guide of temperature
The temperature can be adjusted for Min-Max levels.
1. Press the [Select] button to select Refrigerator Compartment, Prime Fresh Case, or
Freezer Compartment.
2. Press the [Temp. Control] button to select from Max, Mid, or Min levels.
The setting of [Prime Fresh] can be set to either “Chill”, “Min”, “Med” or “Max” levels.
Button
Temperature
setting
Fridge
Prime Fresh
Freezer
Chill
–
Approximately
-1 °C ~ 3 °C
–
Max
Lower than “Med”
by approx.
2 °C ~ 3 °C
Lower than “Med”
by approx.
2 °C ~ 3 °C
Lower than “Med”
by approx.
2 °C ~ 3 °C
Med
Approximately
1 °C ~ 6 °C
Approximately
-5 °C ~ -1 °C
Approximately
-23 °C ~ -17 °C
Min
Higher than “Med”
by approx.
2 °C ~ 3 °C
Higher than “Med”
by approx.
2 °C ~ 3 °C
Higher than “Med”
by approx.
2 °C ~ 3 °C
Normally, use the refrigerator with the temperature set to “Med”.
(If the temperature control of the freezer compartment or refrigerator compartment is
set to other than “Med”, ECONAVI does not operate.)
How to operate the “9 levels” mode
This refrigerator is specially designed with adjustable temperature levels using 9
different temperature levels as explained below:
To adjust the temperature for the Refrigerator Compartment
1
Set the LED display to “Min” (less cool) by pressing the [Select] button to select
[Fridge] (refrigerator compartment) then press the [Temp. Control] button to select
Min.
2
Press and hold the [Temp. Control] button for approximately 10 seconds until the
LED display returns to the “Min” (less cool) position.
3
The temperature can be adjusted in 9 different levels as specified in the cooling
level table below. By pressing the [Temp. Control] button, the cooling level
increases by an increment of 1 level.
To adjust the temperature for the Freezer Compartment
Follow steps
1
~
3
above respectively while pressing the [Select] button and selecting
[Freezer] (freezer compartment) instead of [Fridge] (refrigerator compartment).
To reset the setting “9 levels” mode
Repeat steps
1
and
2
to return the unit to normal operation mode.
Cooling
Level
Step
Minimum
Maximum
LED Display
1
2
3
4
5
6
7
8
9
Lighting
Blinking
Not lighting
●
The temperature control can vary depending on the environment and amount of food
stored in the refrigerator.
11
ARAHE200490_EN.indd 11
ARAHE200490_EN.indd 11
10/18/2561 BE 11:08
10/18/2561 BE 11:08
