Installation
Operation
To use all features
Control Panel
Temperature setting and a guide of temperature
The temperature can be adjusted for Min-Max levels.
Button
Temperature
setting
Fridge
Prime Fresh
Freezer
Chill
Approximately
-1 °C ~ 3 °C
Min
Higher than “Med”
by approx.
2 °C ~ 3 °C
Higher than “Med”
by approx.
2 °C ~ 3 °C
Higher than “Med”
by approx.
2 °C ~ 3 °C
Med
Approximately
1 °C ~ 6 °C
Approximately
-5 °C ~ -1 °C
Approximately
-23 °C ~ -17 °C
Max
Lower than “Med”
by approx.
2 °C ~ 3 °C
Lower than “Med”
by approx.
2 °C ~ 3 °C
Lower than “Med”
by approx.
2 °C ~ 3 °C
Normally, use the refrigerator with the temperature set to “Med”.
(If the temperature control of the freezer compartment or refrigerator compartment is
set to other than “Med”, ECONAVI does not operate.)
How to operate the “9 levels” mode
This refrigerator is specially designed with adjustable temperature levels using 9
different temperature levels as explained below:
For the Refrigerator Compartment
1
Set the LED display to the “Min” position by touching the [Fridge] button.
2
Touch and hold the [Fridge] button for 10 seconds until the LED display is at the
“Min” position.
3
Use the [Fridge] button to set the required temperature mode, where one step is
the minimum cooling mode and 9 step is the maximum cooling mode.
For the Freezer Compartment
Operate above
1
and
3
steps with touching [Freezer] button instead of [Fridge] button.
To reset the setting “9 levels” mode
Repeat steps
1
and
2
to return the unit to normal operation mode.
Cooling
Level
Step
Minimum
Maximum
LED Display
1
2
3
4
5
6
7
8
9
Lighting
Blinking
Not lighting
●
The temperature control can vary depending on the environment and amount of food
stored in the refrigerator.
7
AK-177470_T0217-0_EN.indd 7
AK-177470_T0217-0_EN.indd 7
1/28/17 10:13 AM
1/28/17 10:13 AM
