Panasonic ECONAVI NA-FS85G3WAU Скачать руководство пользователя страница 11

Страница: 11 / 28

Customise the settings

You can customise the water temperature
setting for the wash stage of a cycle, the wash/
rinse/spin settings and the water level setting.

Set the water temperature for main

■

wash fill

Water temperature

Hot:

Approx. 40 °C

Warm: Approx. 30 °C
Cold:

Approx. 20 °C

After performing Step 2 on page 10, press
the [Temp Setting] button repeatedly until
the lamp of the desired water temperature
lights up.

Set the wash/rinse/spin settings

■

After performing Step 2 on page 10, press the
[Wash], [Rinse] or [Spin] button repeatedly until
the lamps of the desired cycles light up.

To change the wash/rinse/spin settings

●

after a cycle has started:

Press the [Pause] button, and change



the settings.

Press the [Start] button to restart.



Set the water level

■

After performing Step 3 on page 10, press
the [Water Level] button repeatedly until the
desired water level indicator lights up.

Note

You cannot change the water temperature

●

setting once a cycle starts.

Some settings may not be available

●

depending on the cycle. (P.12)

Timer Delay function

You can select the finish time of a cycle
2–24 hours from the current time.

After performing Step 2 on page 10, press
the [Timer Delay] button and select the
finish time (hours).

The time is shown in the display area.

●

The time increases by an hour each time you

●

press the button.

Check the set details

■

Press the [Timer Delay] button when the
timer is set.

The cycle, wash/rinse/spin settings, water

●

temperature setting, water level and finish
time will be displayed.

Cancel or change the finish time

■

Press the [Power Off] button to turn off the
washing machine, and repeat the operations
from Step 1 on page 10.

Note

All indicators, lamps and displays except for

●

the “Reserve” information on the display
area and the ECONAVI display go off
2 minutes after pressing the [Start] button.

Do not use soap powder.

●

The finish time can exceed the programmed

●

time due to the water feeding and draining
condition.

This function is not available depending on

●

the cycle. (P.12)

1$)6B*BHQJLQGG

Содержание ECONAVI NA-FS85G3WAU





























Результаты поиска

Содержание ECONAVI NA-FS85G3WAU

Отзывы:

Похожие инструкции для ECONAVI NA-FS85G3WAU

Бренды по названию

Популярные бренды

Panasonic ECONAVI NA-FS85G3WAU, Руководство по эксплуатации

Результаты поиска

Содержание ECONAVI NA-FS85G3WAU

Отзывы:

Похожие инструкции для ECONAVI NA-FS85G3WAU

Бренды по названию

Популярные бренды