3-34
Contr
ol of
VRF SYSTEMS
1
2
3
4
5
6
7
8
9
EN 7
Overview of the ECONAVI function
The ECONAVI sensor detects human activity and conserves energy
based on the activity level.
High activity
Cooling:Target temperature is the
same as the set temperature.
Heating: Target temperature is 1 °C
lower than the set temperature.
Low activity
Cooling: Target temperature is 1 °C
higher than the set temperature.
Heating: Target temperature is the
same as the set temperature.
No one in the room
No one in the room for 20 minutes
Cooling: Target temperature is 2 °C
higher than the set temperature.
Heating: Target temperature is 2 °C
lower than the set temperature.
No one in the room for 3 hours
Cooling: Cooling will stop and the unit
will be in fan only mode.
Heating: Heating will stop and the
unit will be in fan only mode.
* When the sensor detects
movements in the room
which have been empty,
it will resume operation
to match with the activity
level.
EN
FR
ES
DE
IT
PT
GR
RU
UR
KZ
EN 8
WARNING
Ɣ
Do not use the ECONAVI function in areas only with infants,
babies, or people with disabilities. In situations with limited or no
human movement, the sensor may consider there to be no human
activity and turn off the unit.
Notes
Ɣ
Even when target temperature is changed through the ECONAVI
function, the set temperature shown in the remote controller does
not change.
Ɣ
Even when Cooling/Heating is changed to Fan through the
ECONAVI function, the operation mode shown in the remote
controller will still be Cooling/Heating.
Ɣ
It is possible to change the time needed to start changing
operation mode (standard setting : 3 hours) after the room has
been empty. If you need to do so, please contact the dealer.
Ɣ
It is possible to choose from the following options for the
operation to be performed after a lapse of 3 hours since the room
has been empty.
Operates in the Fan mode only.
Stops and resumes operations after human movements are
detected.
Stops and will not resume operations even after human
movements are detected.
Continues to operate in the current mode.
If you need to do so, please contact the dealer.
Ɣ
Please use the indoor unit and remote controller designed for the
ECONAVI function. Using a remote controller for the ECONAVI
function allows the user to turn the ECONAVI function ON/OFF.
2.
ECONA
VI Sensor (CZ-CENSC1)
TD831193-00 VRF SYS INDOOR.indb 34
17/03/09 11:02:44
AMP Air Conditioning
www.ampair.co.uk | [email protected]
