6
RQT8792
Preparations
1
Attaching the battery
(When the unit is off)
The illustrations shown are of CGR-H711; however the steps for CGR-H712 (optional) or
CGR-H701 (optional) are the same.
Detaching
≥
Turn the unit off before detaching the battery pack.
When not using for long periods of time
≥
Remove the battery pack (
➜
left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
≥
Recharge the battery for re-use.
RELEASE
DETACH
ATTACH
Clicks into place
Check to make sure it is securely fastened.
Bottom side of this unit
RELEASE
DETACH
ATTACH
Battery pack
RELEASE
DETACH
ATTACH
1
Press and hold
2
DC IN
DC I
N
12
V
To household
mains socket
AC adaptor
(included)
AC mains lead
(included)
≥
You can also use this unit without charging while
connecting the AC adaptor and the AC mains lead.
≥
You can also use this unit without charging while
connecting Car DC Adaptor (
➜
page 24, Enjoying in a car).
To conserve power
This unit consumes 0.4 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC mains lead from the household mains
socket.
The unit is in the standby condition (the [
Í
] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.
2
Recharging the battery
The battery is not charged at the time of purchase. Charge before initial use.
[
Í
]
goes
out
➜
lights
§
[CHG]
lights
➜
goes out
§
Only when recharged with the unit
off.
Recharging time
:
➜
page 7, Approximate recharging
and play times
When finished, disconnect the AC
adaptor and the AC mains lead.
Í
CHG
Started
Finished
Pr
epara
ti
ons
P2-35 e.fm Page 6 Monday, March 5, 2007 2:46 PM
