Panasonic DVD-K32GCS, Руководство по обслуживанию

Страница: 31 / 108

Error
Code
Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect
U11 Focus error Focus coil, FE singal error TRV Unit DV4.1
(IC8001)
H01 Tray loading error LD motor error, DV4.1 (IC8001) error LD
Motor IC8251
H02 Spindle servo
error (Spindle servo, DV4.1 (IC8001) SP
motor, CLV servo error) LD
Motor DV4.1
(IC8001)
H03 Traverse servo
error Traverse servo, DV4.1 (IC8001) , TRV
motor error TRV
Motor DV4.1
(IC8001)
H04 Tracking servo
error Tracking coil, DV4.1 (IC8001) error TRV Unit DV4.1
(IC8001)
H05 Seek error TRV Motor, IC8251 error TRV
Motor IC8251
H07 Spindle motor
drive error SP motor current error, IC8251 error TRV Unit IC8251
F893 FROM falsification Firmware soft error, DV4.1 (IC8001)
error
FROM
(IC8651)
(*1)
DV4.1
(IC8001)
F895 Language area
abnormality Firm version agreement check for
factory preset setting failure
prevention FROM
(IC8651)
(*1)
F897 initialize is not
completed Initialize completion check for
factory preset setting failure
prevention
Note:
An error code will be canceled if a power supply is turned OFF.
*1: When FROM or Module P.C.B is replaced ,be sure to write the present
value into the player as the initial setting of laser drive current . (Refer to
section 8.5 initial setting of laser drive current .)
Writing method :
a. Press the "PAUSE" button on the remote control unit while pressing
the "PLAY" and "OPEN/CLOSE" buttons on the player.
b. Turn off the second power.
8.4. Last Error Code saved during NO PLAY
31