6
RQT6297
Getting started
AC IN
OPTICAL
SUB-
WOOFER
R
P
R
L
Y
P
B
DIGITAL AUDIO OUT
[PCM/BITSTREAM]
AUDIO OUT
COMPONENT
VIDEO OUT
VIDEO OUT S VIDEO OUT
~
AUDIO
IN
L
R
VIDEO
IN
IN
S VIDEO
S VIDEO OUT
COMPONENT
VIDEO IN
Y
P
B
P
R
P
B
Y
P
R
COMPONENT
VIDEO OUT
VIDEO OUT
[1]
Connection to a television
This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. To get the full benefit from
the powerful 5.1-channel audio found on DVDs, you should connect an amplifier and six speakers(
➡
page 18).
Before connection
≥
Disconnect the AC power supply cord.
≥
Refer to the television’s operating instructions.
Audio/video cable
(included)
AC power
supply cord
(included)
red white yellow
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
red white yellow
S video cable
(not included)
To household AC outlet
(AC 120 V, 60 Hz)
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
Television
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference
signals (P
B
/P
R
) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors.
≥
The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B
/P
R
, Y/B-Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same color.
≥
After making this connection, change the black level for a better
picture (
➡
page 16, Video—Black Level Control).
Video cable
(not included)
Television
Do not:
≥
mix old and new batteries.
≥
use different types at the same time.
≥
heat or expose to flame.
≥
take apart or short circuit.
≥
attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
∫
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet)
directly in front of the unit.
∫
Batteries
≥
Insert so the poles (
i
and
j
) match those in the remote control.
≥
Do not use rechargeable type batteries.
[2]
The remote control
R6, AA, UM-3
Television
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
Conserving power
This unit consumes a small amount of power, even when it is turned off (approx. 2.5 W). To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
