84
Setup menus
(continued)
<BASIC> (continued)
*1
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item
Description of setting
007
CHARA
H-POS
For setting the character position in the
horizontal direction for superimposed
indications, such as time codes for HD SDI
MONITOR/SD SDI MONITOR/VIDEO OUT3
connectors and superimposed indications from
the IEEE 1394 digital interface.
0000
0
:
:
0006
6
:
:
0037
37
<Note>
When this menu item has been set, the displays
are output to the HD SDI MONITOR, SD SDI
MONITOR and VIDEO OUT3 connectors in the
DISPLAY SEL status even when the SUPER OFF
setting is established. However, if the menu has
been exited, the SUPER OFF or ON setting is
followed.
Furthermore, CHARA TYPE is output as per the
menu setting.
008
CHARA
V-POS
For setting the character position in the vertical
direction for superimposed indications, such as
time codes for HD SDI MONITOR/SD SDI
MONITOR/VIDEO OUT3 connectors and
superimposed indications from the IEEE 1394
digital interface.
0000
0
:
:
0023
23
:
:
0032
32
<Note>
When this menu item has been set, the displays
are output to the HD SDI MONITOR, SD SDI
MONITOR and VIDEO OUT3 connectors in the
DISPLAY SEL status even when the SUPER OFF
setting is established. However, if the menu has
been exited, the SUPER OFF or ON setting is
followed.
Furthermore, CHARA TYPE is output as per the
menu setting.
009
CHARA TYPE
For setting the display type for the
superimposed displays and for the HD SDI
MONITOR, SD SDI MONITOR and VIDEO OUT3
connectors and superimposed indications from
the IEEE 1394 digital interface as well as for the
SETUP MENU, etc.
0000
WHITE
White characters on a black background.
0001
W/OUT
White characters with black borders
.
<Note>
CHARA TYPE is output as per the menu setting.
010
*1
MONI
CONTROL
For setting whether to forcibly set the recorder
to the EE mode and output the player’s
playback signals to the monitor if the PLAYER
button on the recorder is pressed when the
monitor is connected only to the recorder
during deck-to-deck editing.
0000
MANU
The recorder is not forcibly set to the EE mode.
0001
AUTO
The recorder is forcibly set to the EE mode, and the
player’s playback signals are output.
No./Item
Description of setting
011
CU-ROLL
TIME
For setting the preroll time in the MULTI CUE
mode.
Any time from 0 to 15 seconds can be set in 1-
second increments.
0000
0s
:
:
0005
5s
:
:
0015
15s
015
AUTO
STEP
For selecting the save processing to be
conducted when the memory capacity, which
enables up to 99 warning messages to be
saved, has been exceeded while the error log
function is operating.
0000
OFF
99 messages are set as the upper limit, and any
more warning messages which subsequently
occur are not saved in the memory.
0001
ON
99 messages are saved, and the next warning
message that has subsequently occurred is
saved as No.99. The warning messages already
saved are each shifted down by one number in
succession.
020
*1
SYS FORMAT
For selecting the recording and playback
formats including HD REF signals
0000
1080i
The 1080i format is selected
.
0001
720p
The 720p format is selected.
