Panasonic DP-MB311EU, Руководство по эксплуатации

Страница: 51 / 144

7. After you finish copying, press MwN to reset this
feature.
7.2.7 Booklet feature
You can make copies, and then fold them in half to create
booklets. The documents will be reduced to fit the
recording paper.
1
Set the original (page 35).
2
Press MoN repeatedly to select “
PAGE LAYOUT
” .
3
Press MCN or MDN repeatedly to select “
BOOKLET
” .
A M OK N
4
Press MCN or MDN repeatedly to select the desired
binding direction from “
LEFT BIND
” or “
RIGHT
BIND
” . A M OK N
5
Press MCN or MDN repeatedly to select the desired
binding pages.
–
“
1
” : To make a booklet with every 4 documents
printed as separate blocks.
– “
ALL
” : To make a booklet with all documents
printed as 1 block.
6
M OK N
7
If necessary, enter the number of copies (up to 99).
R Multiple copies will be collated automatically.
8
When using the scanner glass:
1.
MxN
R
The unit will scan 1 page.
2. Place the next page on the scanner glass and
press
M OK N . Repeat this until you have scanned
all pages.
3. If “
1
” is selected in step 5, the unit will start
copying.
R You can press MxN anytime to start copying.
R For multiple copies, press MxN to start
copying.
If “
ALL
” is selected in step 5, press MxN to start
copying.
When using the automatic document feeder:
MxN
9
After you finish copying, press MwN to reset this
feature.
Note:
R The following size recording paper (plain and thin)
can be used.
– A4
– Letter
– Legal
– F4/Folio/Foolscap (216
´
330 mm)
– Mexico Oficio/India Legal (216
´
340 mm)
– Custom size paper (feature #391 on page 73
and feature #392 on page 73)
R The unit may store the documents into memory at a
reduced resolution if
“
ALL
” is selected in step 5 or
more than 1 copy is set to be collated in step 7. When
the memory becomes full while storing, if “
1
” is
selected in step 5, the unit will print out only the stored
pages. If
“
ALL
” is selected in step 5, the unit will
cancel the printing.
R You can save the previous page layout setting
(feature #467 on page 80).
7.2.8 Edge feature
You can set the unit not to copy the outer edges of the
document without reducing the copied documents to fit
the recording paper. This is useful for copying
documents with dirty edges.
1
Set the original (page 35).
2
Press MoN repeatedly to select “
EDGE
” .
3
Press MCN or MDN repeatedly to select “
ON
” . A
M OK N
4
Press MCN or MDN repeatedly to select “
LONG EDGE
” .
A M OK N
5
Enter the desired edge width of long edge using the
dial keypad.
A M OK N
6
Press MCN or MDN repeatedly to select “
SHORT
EDGE
” . A M OK N
7
Enter the desired edge width of short edge using the
dial keypad.
A M OK N
8
If necessary, enter the number of documents (up to
99).
A MxN
9
After you finish copying, press MwN to reset this
feature.
Note:
R This feature cannot be used when your original
document size or the recording paper size is set to
A6.
R This feature and page layout features cannot be used
at the same time (except for N in 1).
R You can hold the previous edge setting (feature #473
on page 80).
7.2.9 Margin feature
You can set the unit not to copy a particular edge of the
document to make a margin. This is useful for binding
the copied documents.
1
Set the original (page 35).
2
Press MoN repeatedly to select “
MARGIN
” .
3
Press MCN or MDN repeatedly to select “
ON
” . A
M OK N
4
Press MCN or MDN repeatedly to select the page layout
from “
PORTRAIT
” or “
LANDSCAPE
” . A M OK N
5
Press MCN or MDN repeatedly to select the edge you
want to set the margin for from “
TOP
” , “
RIGHT
” ,
“
LEFT
” or “
BOTTOM
” . A M OK N
51
7. Copier