Panasonic DP-MB311EU, Руководство по эксплуатации

Страница: 26 / 144

– Storing, editing or erasing items in the address book
using your computer
– Programming the features using your computer
– Assigning a password and printing confidential or
sensitive documents (Secure Print)
– Printing only the first copy to check the printing result
(Proof Print)
– Sending, receiving fax documents using your
computer
R Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Driver Software Installation]
dialogue box may appear. If this dialogue box
appears, click [Close].
R Software features and appearance are subject to
change without notice.
R If you are also using KX-MB200/KX-MB700/
KX-FLB880 series, see page 121.
3.9.1 Preparing your computer and CD-ROM
1
Start Windows and exit all other applications.
R You must be logged in as an administrator in
order to install Multi-Function Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
R If the [Select Language] dialogue box appears,
select the language that you want to use with this
software. Click
[OK] .
R If the installation does not start automatically:
Click
[Start] A [All Programs] A
[Accessories] . Choose [Run] . Type “ D:\Install ”
(where “ D ” is the drive letter of your CD-ROM
drive). Click [OK] .
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3
Select your connection.
R For USB connection/wired LAN connection, refer
to “3.9.2 USB connection/LAN connection”,
page 26.
R For wireless LAN connection, refer to
“3.9.3 Wireless LAN connection”, page 27.
3.9.2 USB connection/LAN connection
1
[Easy Installation]
R The installation will start automatically.
2
When the setup program starts, follow the on-screen
instructions.
R Easy Print Utility (page 39) and Device Monitor
(page 97) will also be installed.
3
The [Connection Type] dialogue box appears.
For USB connection:
1. [Connect directly with a USB cable.]
A
[Next]
R The [Connect Device] dialogue box will
appear.
2. Connect the unit to a computer with the USB
cable (
A ), then click [Next] .
A
R If the unit is connected to your computer, the
model name will be automatically detected.
R You can change the name of the unit if
necessary.
3. Click [Install] , then follow the on-screen
instructions.
R The files will be copied to your computer.
For LAN connection:
1. [Connect via the Network.]
A [Next]
R The [Select a Network Device] dialogue box
will appear.
2. Check [Select from the search list] and select
the unit from the list.
R If the name of the desired unit is not displayed
on the list, and the IP address for the unit has
been assigned, check
[Direct input] and
enter the IP address.
3. [Next]
R You can change the name of the unit if
necessary.
4. Click [Install] , then follow the on-screen
instructions.
R The files will be copied to your computer.
26
3. Preparation