Panasonic DP-3530, Руководство по эксплуатации

Страница: 74 / 100

74
Function
For Key Operator
■
Copier Settings
Screen
No.
06 Interleaving Default Selects OHP interleaving paper Blank
●
Blank, Copy
07 Page Insertion Default Selects page insertion Blank
●
Blank, Copy
08 Cover Mode Default Selects cover paper F, Blank
●
F, Blank , F, Copy
FB, Blank , FB, Copy
(F: Front, FB: Front + Back)
09 Job Build And SADF Mode Enables or disables the use of SADF function. Yes
●
No, Yes
10 Maximum Copy Setting Determines whether to limit number of copies 0
(0-99). (No limit)
12 M1, Size Inputs a size in job memory 1 for frequently 70 x 160 mm
used size. (X) (Y)
●
X: 5~432/Y: 5~297 mm
(See page 63)
13 M2, Size Inputs a size in job memory 2 for frequently 95 x 220 mm
used size. (X) (Y)
●
X: 5~432/Y: 5~297 mm
(See page 63)
16 Memory Overflow Warning Selects the task to perform when memory Print
overflow occurs
●
Print, Cancel
17 Toner Save Mode (T) Selects the toner save in Text mode. None
●
None, Level 1, Level 2
∗
18 Toner Save Mode (T/P) Selects the toner save in Photo/Text mode. None
●
None, Level 1, Level 2
∗
19 Toner Save Mode (P) Selects the toner save in Photo mode. None
●
None, Level 1, Level 2
∗
20 Add New Tandem Desti. Inputs a new destination to split the copy job
21 Edit Tandem Destination Edits the split copy job destination
22 Delete Tandem Desti. Deletes the split copy job destination
23 Copier Settings Print Prints the copier settings
●
Stop, Start
Modes Function
Initial
Setting
04/05
05/05
NOTE
●
The Key Operator ID Code is required before any changes can be made to items on this page.
∗
“Level 1 or 2” setting consumes less Toner than “None” setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
03/05
02/05