6
From RUN mode, press
for 4s to select pro mode.
The examples below begin with the factory default settings.
<RUN mode>
Press 4s.
<Pro mode>
<Sub-display selection>
<Display speed selection>
<Hysteresis fixed value selection>
1
<
Standard type only
: Color display scheme>
<ECO mode setting>
<Setting check code>
2
<Setting copy mode>
<Reset setting>
11
PRO MODE
Item
Description
Sub-display selec-
tion
Selects what is displayed in the sub-display.
•
OFF
: nothing.
•
Unit
: pressure unit selected.
•
No.**
: desired number.
•
CuSt
: desired numbers, letters (as possible),
signs.
Display speed
selection
Sets the speed of how often the displayed pres-
sure value on the main display is updated.
Hysteresis fixed
value selection
Sets hysteresis for the EASY mode and window
comparator mode (8 levels).
Color display
scheme selection
(Standard type only)
Color for main display based on either compara-
tive output 1 or comparative output 2.
ECO mode setting
Current consumption can be lowered.
•
OFF
: normal operation (ECO mode is off).
•
Std
: if no key operation is carried out for
approx. 5s in RUN mode, the display
becomes dark.
•
FULL
: if no key operation is carried out for
approx. 5s in RUN mode, the display is
turned off.
Press any key to temporarily show the normal
display.
Setting check code
Current settings for DP-100 are stored in code,
which you can display.
See “Code table” on page 7.
Setting copy mode
Settings can be copied from master sensors to
slave sensors. For details, see page 7, section
12, SETTING COPY FUNCTION.
ON
: settings are copied.
ON-L
: settings are copied; slave sensor is set in
key-lock state.
Reset setting
Returns to default (factory) settings.
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Setting:
Setting:
When “No. display”
or “Custom display”
is set in 'Sub-display
selection'.
Set flashing values
with Up and Down
keys.
<RUN mode>
<Sub-display selection>
Standard
Display OFF
Unit display
Custom display
No. display
MODE
(250ms)
(500ms)
(1000ms)
MODE
1
1 level = approx. 1 digit, when Pa is selected as the pressure unit.
2
See “Code table” on page 7.
・・・・
・・・・
(Min.)
(Max.)
MODE
Main display color will
change based on
comparative output 1
Main display color will
change based on
comparative output 2
MODE
OFF
Standard
Max.
MODE
Automatic
MODE
MODE
MODE
Copy sending
OFF
Copy sending
ON-L
Copy sending
ON
MODE
MODE
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG
