Specifications
IEC Certificated model
LED Indicator shows status of charging.
Indicator
POWER/ CHARGE/ ERROR
Items
Specifications
7kW Type1
7kW Type2 3.5kW Type1 3.5kW Type2
Type
Rating
AC 220V 32A
AC 220V 16A
Frequency
50/60 Hz
Temp. range
-30 °C~ +40 °C
Weight
Approx. 5.1kg Approx. 5.3kg Approx. 4.4kg Approx. 4.6kg
Standard (main)
IEC 61851-1
Connector (IEC 62196-2)*
IEC Type1/ Type2
Valid Cable Length
5 m
All Rights Reserved © 2021 COPYRIGHT Panasonic Corporation life Solutions Company
Panasonic Corporation Life Solutions company
CAUTION! Please refer to operation manual(Users guide) / Installation manual carefully prior installation or operation.
CPLT (control pilot) and
Safety design
Easy to charge
CPLT: Control pilot signal communicates between Electric
Vehicle and charger.
hekia S equips Charging Circuit Interrupting Device, which
cut off for unexpected condition (10mA @50Hz).
To check if connection and lighting
charge indicator.
Interior setting
Installation
example
Car-port setting
1. Releasing charging
connector from holder.
2. Releasing the hoocked
cable to expand to con-
nect the EV connector
inputs.
3 . C o n n e c t i n g t o E V
connector inputs.
Press the
unlock switch to
release
(Type1 only)
Note: Please refer to operation manual for starting and finishing normally.
202104
* E V c h a r g e r c a n u t i l i z e s o l a r p o w e r
sources via. inverter in the same electrical
distribution board.
*Connector type is depending on its region or type of inputting connector of EV/PHEV.
Specification and appearance are subject to change without notice.
Ingress Protection (IP)
IP 55
132
Type1:(191)
Type2:(213)
350
115
141
Safety
Compact
hekia S expands space flexibility.
Unit volume
reduction
40
% down
132mm
350mm
164mm
604mm
Current model
in Japan
hekia S
Dimensions:mm
Solar panel
*
Model No.
DNH3261150 DNH3262150 DNH3231150 DNH3232150
Certified for SANYO Electric Co., Ltd./ SANYO is a member of Panasonic Group.