[2]-3. Select Synchro Recording Mode at the Setup Menu.
(See page 10 of Manual)
OPERATION:
Press the [MENU] button and turn the MULTI JOG dial to display "Setup Menu ?", then press the JOG
dial to enter the Setup Menu. Turn the JOG dial to display "Sync Rec ?", then press the JOG dial to enter
Synchro Recording Mode. Turn the JOG dial to select your favorite Recording Mode from the following
cycle: "Sync. Off?"
→
"Disc Sync.?"
→
Make CD?"
→
"1Tr Sync.?" (
→
"Sync. Off?"). Press the JOG
dial to confirm.
THINGS TO KNOW (KEY WORDS):
"Sync. Off"
: You can manually start recording by simply pressing the [REC] button.
"Disc Sync."
: Recording will be automatically triggered to copy entire disc when the external source
player is started. (Note: The disc must finalized manually)
"Make CD"
: Recording is automatically triggered to copy entire disc when the external source player is started.
(Note: Finalizing will be done automatically after recording is finished.)
"1Tr Sync."
: Recording will be automatically triggered to copy selected single track when the external
source player is started. (Note: The disc must finalized manually)
[2]-4. Select Input to match connection of desired source.
(See page 15 -19 of Manual)
OPERATION:
Press [INPUT] button.
Each time the [INPUT] button is pressed, the selected input switches in the following cycle: Optical Input "Optical In"
→
Coaxial Input "Coaxial In"
→
Analog Unbalanced Input "AnaUNBAL In"
→
Analog Balanced Input "Ana BAL In"
→
Copying from Internal CD Player "CD Player" (
→
"Optical In").
REALLY COOL TOUCH:
You can personalize the DN-C550R input display to identify your specific external devices. The custom display name can contain up to 12 letters per input.
Example : "Optical In"
→
"MD Recorder", " Coaxial In"
→
"CD Player"
(See page 12 of Manual)
[3] Settings when making recordings from both external sources and internal drive.
[3]-1. Press the [RELAY MODE] button on the front panel to select either “Single Play” or “Dual Play”
Follow the same procedure as in [1]-1.
[3]-2.Select SCMS (Serial Copy Management System)
from the Setup Menu Mode at the front panel.
Follow the same procedure as in [1]-2.
RECOMMENDATION:
We recommend to select "INH. (Inhibit)" for more convenient recordings.
[3]-3. Select Copying Mode (Dubbing Mode) bt pressing [DUBBING-NORMAL] button or [DUBBING-HIGH] button for Internal CD
Copying.
Follow the same procedure as in [1]-3.
[3]-4. Select Synchro Recording Mode in the Setup Menu Mode for recording from external equipment.
Follow the same procedure as in [2]-3.
[3]-5. Everytime you record from external source equipment, make sure the correct input terminal is selected by pressing the
[INPUT] button.
Follow the same procedure as in [2]-4.
2
[2] Settings for recording from External Sources
[2]-1. Press the [RELAY MODE] button on the front panel to select either “Single Play” or “Dual Play”
RECORDING is only possible in either "Single Play" or "Dual Play" mode .
[2]-2. Select SCMS (Serial Copy Management System) from the Setup Menu Mode at the front panel.
(See page 10 & 13 of Manual)
Digital equipment
CD player, etc.
Digital
source
Analog
source
Digital
recording
Analog
recording
Digital
Digital
Analog
Analog
Recording is not possible.
Recording is
possible.
Recording is
possible.
Recording is possible.
Digital
Digital
Recording is possible.
Recording is not possible.
* Recording is possible without reception of the copy defect restriction.
OPERATION:
Follow the same procedure as in [1]-1. (See page 24 of Manual)
NOTE & OPERATION: Follow the same procedure as in [1]-2.
NOTES:
• SCMS INH: Digital recording is possible without restriction even if the recording source contains a copy prohibit code. In this case the
copy prohobit code is written on the recorded disc. In addition, a copy prohibit code is writen on the recorded disc even if the recording
source does not have a copy prohibit code.
• SCMS ENA: In compliance with SCMS, digital recording is not possible if the recording source contains a copy prohibit code.
