Panasonic DMR-EZ17P, Руководство по обслуживанию

Страница: 14 / 70

Error Code Diagnosis contents Description Monitor Display Automatic FL display
HARD
ERR Drive error The drive detected a hard error. “ DVD drive error.” Display for 5 seconds.
No REC Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media. No display
SELF
CHECK Restoration operation Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It
will OK, if a display disappears
automatically. If a display does not disappear,
there is the possibility that defective Digital
P.C.B.
No display
“0” is displayed one by one.
PLEASE
WAIT Unit is in termination process Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off. No display
UNFORM
AT Unformatted disc error You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
7.1.2. Special Modes Setting
Item FL display Key operation
Mode name Description Front Key
TEST Mode *All the main unit´s parameters are initialized. Press [STOP], [CH UP] and
[OPEN/CLOSE] keys
simultaneously for five seconds
when power is off.
Rating password The audiovisual level setting password is
initialized to “Level 8”. No display When the power is on (E-E mode).
Open the tray, and press [REC] and
[PLAY]
simultaneously for 5
seconds.
Service Mode Setting every kind of modes for servicing.
*Details are described in “
7.1.3. Service
Mode at a glance ”.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*During Schedule Recording, Forced disc
eject is invalid.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted. The display before execution
leaves.
When the power is off, press
[STOP]
and [CH UP] keys
simultaneously for 5 seconds.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Schedule Recording is ON, execute
“Forced Power-off” after releasing Schedule
Recording. Display in P-off mode. Press [Power] key over than 10
seconds.
14
DMR-EZ17P