- 2 -
RF IN
RF OUT
AC IN~
OPTICAL
VIDEO
AUDIO
S VIDEO
L
R
P
B
P
R
Y
DVD OUT
DVD Recorder
Connecting with 21-pin Scart cable
Follow the steps below.
Disconnect the power of all units.
1
Connect the Aerial
to the
RF IN (Aerial input) of the
DVD Recorder.
2
Connect the
RF OUT
(Aerial output) of the DVD Recorder
to the Aerial input of the television set.
3
Connect the
AV1 socket (21-pin Scart socket) of the DVD Recorder
to the Scart input of the television set.
4
Plug the DVD Recorder and the television set into
the AC mains socket.
If your television supports Q-Link or RGB, connect it to the
DVD Recorder with a fully wired 21-pin Scart cable.
Change the AV2 Input setting to match the output from a
satellite receiver after tuning is completed.
SETUP - Connections - [AV1 Output
]
1
Aerial
RF IN
Aerial input
RF OUT
Aerial output
AC mains lead
AV1 21-pin
Scart socket
RF cable /
Aerial cable
Aerial
input
2
3
TV
4
AC mains lead
=Extra equipment for the connection shown:
RF cable (Aerial cable), 21-pin Scart cable
S
21-pin Scart cable
S
S
AV2
AC IN~
4
If your television set supports Q-Link,
follow the steps for Auto-Setup with Q-Link on page 4.
If your television set does not support Q-Link,
follow the steps for Auto-Setup without Q-Link on page 4.
AV2 (EXT)
AV1 (TV)
RF cable /
Aerial cable
Necessary for TV with Q Link
