Panasonic DMR-EH80VEG, Руководство по обслуживанию

Страница: 19 / 178

12.2. (DVD) SPECIAL MODES SETTING
Item FL display Key operation
Mode name Description Front Key
TEST Mode *All the main unit´s parameters (include
tuner) are initialized. Press [VHS to DVD DUBBING],
[OPEN/CLOSE] and [(DVD)REC]
keys simultaneously for five
seconds when power is off.
Service Mode Setting every kind of modes for servicing.
*Details are described in
“
(DVD) Service Mode ”.
When the power is off, press [VHS
to DVD DUBBING],
[OPEN/CLOSE] and [(DVD) STOP]
keys simultaneously for 5 seconds.
Rating password The audiovisual level setting
password is initialized to “Level 8”. While the tray is open, press
[(DVD) REC] and [(DVD) PLAY]
simultaneously for five seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is
ON, execute "Forced disc eject" after
releasing TimerREC or EXT-LINK.
*This command is not effective during “Child
lock” is ON.
If this command was executed while
TIMER REC is being set, TIMER REC
setting will turn to OFF.
The display before execution
leaves. When the power is off, press
[(DVD) STOP] and [(DVD) CH UP]
keys simultaneously for five
seconds.
Child lock/unlock Set or release "Child Lock". Press [ENTER] and [RETURN] by
remote controller simultaneously
until [X-HOLD] is displayed.
NTSC/PAL system select To switch PAL/ NTSC alternately. The display before execution
leaves. When the power is on (E-E mode),
press [DVD STOP] and
[OPEN/CLOSE] simultaneously for
five seconds.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON, execute “Forced
Power-off” after releasing Timer REC or
EXT-LINK.
Action:
The tray will open, and the power will turn
off. Display in P-off mode. Press [Power] key over than 10
seconds.
Aging Perform sequence of modes as * Aging
Description shown below continually.
Caution:
All programs in HDD and DVD-RAM disc
will be deleted because Formatting is
done once in Aging process.
Display following the then mode. When the power is ON, press
[STOP], [POWER] and
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and
re-execute operation shown above.
(*All the main unit’s parameters
include tuner are initialized by
TEST mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and
re-execute this command.
*When releasing Aging mode,
press [POWER] key.
19
DMR-EH80VEG / DMR-EH80VEB