Recording
SQT0807
31
Recording TV programmes
Recording
To convert the recording mode after recording
in DR mode
Refer to “File Conversion”. (
>
55)
To confirm whether the conversion is
completed
Refer to “To confirm whether the conversion is
completed”. (
>
56)
To cancel a conversion
Refer to “To cancel a “During standby”
conversion”. (
>
55)
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Data service will not be recorded.
• Following contents or media cannot be played back while
recording.
- video file
- photo
- USB HDD (For data files,
>
9) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (
>
96),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
• When a programme is recorded in encrypted form,
conversion will not start until decryption has finished.
(
>
33)
• The title before conversion (the title recorded in DR mode)
will be deleted once the conversion is completed.
• Conversion will take about the same time as the recorded
duration.
• When the HDD does not have enough remaining space,
conversion will not start.
• Conversion is stopped when this unit is turned on.
Conversion will start from the beginning again once the unit
is switched to standby mode.
• When converted, audio content and subtitle will be
converted with the same settings as at the start of
recording.
• When the programme recorded in DR mode is converted,
teletext will not be recorded.
• This unit can record two programmes being
broadcasted at the same time.
§
• About CI Plus restriction (
>
15)
• Notes for recording of an encrypted broadcast
(
>
33)
1
Select the channel to record.
2
Press [REC MODE] and select the
conversion mode, then press [OK].
• This unit will record the programmes in DR
mode once, and then automatically
convert to the selected recording mode
while this unit is in standby.
• Recording mode (
>
9)
• The conversion mode set here is used
as an initial value for the next recording.
3
Press [REC
¥
].
Recording will start.
4
Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
§
[BST855]
[BST850]
[BST755]
[BST750]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (
>
17)
HG
HX
HE
HL
HM
XP
SP
LP
EP
Off (DR)
Conversion Mode Setting
OK
RETURN
HDD Remain
(DR)
m
h
High
Definition
Data Size
Large
Small
Large
Small
Standard
Definition
Automatic Stop at 8:45
REC1/OTR
Recording Time
Continuous recording
30 min
8:00 - 8:45
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 4 (
>
left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[
2
,
1
].
2 Press [OK].
DMR-BST_BCT855EG_eng.book 31 ページ ２０１５年６月４日 木曜日 午後２時５８分
