Panasonic DMP-BDT570, Руководство по эксплуатации

Страница: 36 / 44

- 36 -
Reference
¾ PAL discs cannot be correctly viewed on an
NTSC TV.
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this unit,
select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (
> 30)
¾ When outputting in 4K, images may be
distorted depending on the HDMI cable.
Video is not output.
¾ Video is not output when the “High Clarity
Sound” is set to “On (Video Off)”. (
>
27)
¾ Video from the HDMI AV OUT SUB terminal is
not output when the “HDMI(SUB) Output
Mode” is set to “V.OFF(Video Off)”. (
>
28)
Video is not output in high-definition.
¾
Confirm that “HDMI Video Format” in the
Setup menu is set properly. (
>
28)
¾
To enjoy image in 4K (50p/60p), set “4K ( 50p/
60p ) Output” to “Automatic”. (
> 28)
3D video is not output.
¾ Connect to a full high-definition TV.
¾ Change the settings as required by the
connected TV format. (
> 30, “3D Type”)
¾ Is there a non-3D compatible amplifier/
receiver connected between this unit and a
TV? (
> 11)
¾ If there is a non-3D compatible amplifier/
receiver connected to the HDMI AV OUT SUB
terminal, set the “HDMI(SUB) Output Mode”
to “V.OFF(Video Off)”. (
> 11, 28)
¾ Are the settings on this unit and the TV
correct? (
> 18)
¾ Is the amplifier/receiver that is connected
between this unit and TV on?
¾ Depending on the connected TV, the video
being played back might switch to 2D video
due to changes in resolution etc. Check the
3D setting on the TV.
3D video is not output correctly as 2D.
¾ Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (
> 30, “3D
BD-Video Playback”)
¾ Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “Aspect” and “TV Aspect” are set
properly. (
>
25, 32)
¾
Adjust the aspect setting on the TV.
There is a lot of image lag when playing video.
¾ Set “0” all items in the “Noise Reduction”.
(
> 25)
¾ Set “Audio Delay”. ( > 30)
Cannot switch audio.
¾ The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (
> 29)
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. (
> 11, 29)
¾ When the unit is connected to an amplifier/
receiver with the AUDIO OUT terminals, set
“Analogue Multi Channel”. (
> 30)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (
> 29)
¾ When connecting this unit to a TV via an
HDMI AV OUT MAIN and to an amplifier/
receiver via an HDMI AV OUT SUB, set
“HDMI(SUB) Output Mode” to “V.OFF(Video
Off)”. (
> 11, 28)
There is no sound coming out from the TV.
¾ Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (
> 28) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
There is no sound coming out.
¾ To output audio using DIGITAL AUDIO OUT
terminal, set “OPTICAL / COAXIAL Down
Sampling” properly. (
> 29)
Audio