Panasonic DMP-BD903, Руководство пользователя

Страница: 24 / 40

- 24 -
Settings
[BD903/93]
¾ 24p Output
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p*
1 are output at 24p.
≥ When playing DVD-Video, set to “On” and
then set “24p” in “Video Settings” (
>
22) to
“On”.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾ Deep Color Output
This setting is for selecting whether to use Deep
Color Output when a TV that supports Deep
Color is connected.
¾ Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
*1
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
*2
A high resolution image/display technology of
approximately 4000 (width)
k 2000 (height) pixels.
∫
Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥
“Auto” is effective only when playing Dolby
TrueHD.
∫
Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
[BDT271/270]
¾ DSD Output Mode
Select the audio signal to output.
≥
Select “PCM” or
[BDT271/270]
“Off”, when the
connected equipment cannot decode the
respective audio format. This unit decodes
the audio format and transmits to the
connected equipment.
≥
If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
∫
Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
≥ This function works when the following
conditions are met:
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
Audio