Panasonic DMP-BD50 Скачать руководство пользователя страница 29

Страница: 29 / 80

ISH

RQT9185

When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on
the amplifier/receiver.

The settings are not effective when outputting bitstream signals.

Preparation

Set “Speaker” to “Multi-Channel”. (

28)

Surround back channel is enabled only when the unit is connected
to an amplifier/receiver supporting HDMI 7.1 channel audio.

[BD-V]

: If the original audio is 5.1ch DTS-HD or DTS, the remapping

function is activated to divide it to 7.1ch.

Speaker presence and size (

)

Press [

] to select the speaker icon (

) and press [OK].

Press [

] to select the setting and press [OK].

Icon examples:

Surround speaker (LS)

≥

Large

Select when
the speaker
supports
low-frequency (under 100 Hz) reproduction.

≥

Small

Select when the speaker does not support
low-frequency reproduction.

In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)

Delay time (

)

For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the center, surround and surround back
speakers closer to the seating position, adjust the delay time to
make up for the difference.
If either distance

is less than

, find the difference in the

relevant table and change to the recommended setting.

Press [

] to select the delay time box (

) and press

[OK].

Press [

] to select the setting and press [OK].

Channel balance (

)

This does not work when connected with the HDMI terminal and
“HDMI Audio Output” (

28) is set to “On”.

Select “Test” and press [OK].
A test signal is output.

Front (L)

_—)

Center

_—)

Front (R)

_—)

Surround (RS)

;

Surround (LS)

(—

Surround Back (LB)

(—

Surround Back (RB)

Test signal is output only when the unit is connected using HDMI

AV OUT terminal.

While listening to the test signal, press [

] to adjust the

volume of each speaker
Front speakers: 0.0 to

6.0 dB

Center and surround speakers: 0.0 to

12.0 dB

≥

You cannot adjust the volume of surround back speakers.

Press [OK].
The test signal stops.

≥

No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.

Press [OK].

“General”

Remote Control (

33)

≥

Set Code 1

≥

Set Code 2

≥

Set Code 3

Easy Setting

You can execute basic settings (On-screen Language, TV
Aspect).

≥

Yes

≥

Default Settings

This returns all values in the Setup menu and the on-screen
menu, except for “Remote Control”, “On-screen Language”,
“IP Address / DNS Settings”, “Proxy Server Settings”,
“DVD-Video Ratings” and “BD-Video Ratings” to the default
settings.

≥

Yes

≥

DivX Registration (

20)

You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.

Firmware Update (

≥

Press [OK] to show the following settings.

Automatic Update

When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.

≥

Off

Update Now

You can update the firmware manually.

Changing the speaker setting to suit your speakers

Complete

Test