Panasonic DMP-BD Series, Руководство по обслуживанию

Страница: 12 / 72

12
7.1.2. Special Modes Setting
UNSUP-
PORT Unsupported disc error *An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty. This disc is
incompatible. Display for 5 seconds.
The character indication flows
sideways.
NO READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read. Cannot read.
Please check the
disc.
HARD
ERR Drive error The drive detected a hard error. DVD drive error. Display for 5 seconds.
The character indication flows
sideways.
SELF
CHECK Restoration operation Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BDP drive. No display
The character indication flows
sideways.
PLEASE
WAIT Unit is in termination process Unit is in termination process now.
BYE is displayed and power will be turned off.
No display
The character indication flows
sideways.
No PLAY When there is a viewing restric-
tion on a BD-Video or DVD-
Video. Rating password is set. No display
Item FL display Key operation
Mode name Description Front Key
Rating password The audiovisual level setting password is ini-
tialized to
Level 8 .
Open the tray, and press [SKIP REV
(Remote Controller)] and [PLAY]
simultaneously for 5 seconds.
Service Mode Setting every kind of modes for servicing.
*Details are described in
7.1.3. Service Mode
at a glance .
When the power is off, press
[PAUSE], [PLAY] and [SETUP
(Remote Controller)] keys simulta-
neously for 5 seconds.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Same display as before execution.
When the power is on, disc is not in
tray, press [STOP] and [POWER
(Remote Controller)] keys simulta-
neously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted. The display before execution
leaves. When the power is off, press
[PAUSE] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
Forced power-off When the power button is not effective while
power is ON, turn off the power forcibly. Display in P-off mode. Press [POWER] key over than 10
seconds.
Aging Perform sequence of modes as * Aging
Description shown below continually. Display following the then mode. When the power is ON, press
[PAUSE], [PLAY] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
Error Code Diagnosis contents Description Monitor Display Automatic FL display