Technical use
80
Formatting the Card
Usually, it is not necessary to format the card
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR”.
• If the card has been formatted by a PC or
other equipment, format the card on the
camera again.
[Preparation]
• Set the mode dial to playback [
]. (P25)
1
Press the [MENU] button.
2
Press
3
/
4
to
select [FORMAT] and
then press
1
.
3
When this message is displayed
“DELETE ALL DATA ON THE
MEMORY CARD?”, press
2
to select
[YES].
4
Press the
4
/[REVIEW/SET] button.
• The card is formatted.
• After formatting, recorded images and
any other data cannot be recovered.
• When the remaining power is low, use the AC adaptor.
• During formatting, do not turn the power off.
• If the card cannot be formatted, consult your dealer.
1
2,3,4
2
TRIMMING
FORMAT
PLAY
2/2
SETUP
SELECT
SET
EXIT
MENU
3
SELECT
SET
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YES
NO
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
FZ2-PP.book 80 ページ ２００３年９月２６日 金曜日 午後１２時１分
Содержание DMCFZ2 - DIGITAL STILL CAMERA
Страница 111: ...111 Memo ...
