Playback (advanced)
96
Connecting to a PC (Mass Storage)
1
Turn the camera on and then set
[USB MODE] to [Mass Storage].
(P94)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time for you to
connect the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
¬
Suggestions/Tips
¬
• The flash/access indicator lights
during communication.
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
• If the remaining battery power
becomes low during communication,
the status indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• Use the supplied USB connection
cable only.
DIGITAL
DC IN
EXT.
AV OUT
ACCESS
FX5_FX1-PP.book 96 ページ 2003年12月15日 月曜日 午後1時27分
Содержание DMCFX5PP - DIGITAL STILL CAMERA
Страница 7: ...Preparation 7 USB Connection Cable K1HB08CD0004 CD ROM Strap VFC4033 ...
Страница 129: ...129 MEMO ...
Страница 130: ...130 MEMO ...
Страница 131: ...131 MEMO ...