
Others
- 136 -
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
• It is recommended to use a card with SD Speed Class
with “Class 6” or higher when
recording motion pictures.
¼
The SD Speed Class Rating is the speed standard for successive writes.
• In the event that it stops even after using a “Class 6” card or higher, the data writing
speed has deteriorated so it is recommended to make a backup and then format
(P31)
.
• Depending on the type of card, motion picture recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
• A folder cannot be created because there are no remaining folder numbers that can be
used.
(P116)
"
Format the card after saving necessary data on a PC etc.
(P31)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
• The AV cable
(P123)
is connected to the camera.
"
Press [MENU] if you want to delete this message at once.
"
Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.
(P30)
• This message also appears when the USB connection cable is connected to the camera
only. In this case, connect the other end of the USB connection cable to a PC or a
printer.
(P114, 117)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
• The printer cannot print.
"
Check the printer.
[NO BATTERY POWER REMAINS]
• The remaining battery power is low.
"
Charge the battery.
[THIS BATTERY CANNOT BE USED]
• The battery cannot be recognized by the camera.
"
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
• The battery cannot be recognized as its terminal is dirty.
"
Remove any dirt etc. from the terminal.