(ENG) VQT5E54
9
Before use
■
Camera handling
●
Keep the camera away from excessive vibration, force, or pressure.
●
The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or where
water can come into contact with the camera.
●
Do not allow camera to come into contact with pesticides or volatile
substances (can cause surface damage or coating to peel).
■
Condensation (When the lens, the LCD monitor or the viewfinder is fogged up)
●
Condensation may occur when the camera is exposed to sudden changes of
temperature or humidity. Avoid these conditions, which may make the lens,
the LCD monitor or the viewfinder dirty, cause mold, or damage the camera.
●
If condensation does occur, turn off the camera and wait about two hours
before using it. Once the camera adjusts to the surrounding temperature,
the fogging will clear naturally.
■
Caring for your camera
●
Before cleaning the camera, remove the battery or disconnect the power
plug from the outlet.
●
Do not press the LCD monitor with excessive force.
●
Do not press the lens with excessive force.
●
Do not keep rubber or plastic products in contact with the camera for a long
period of time.
●
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents,
etc., to clean the camera, since it may deteriorate the external case or the
coating may peel off.
●
Do not leave the camera with the lens facing the sun, as rays of light from
the sun may cause it to malfunction.
●
Do not extend the supplied cord or cable.
●
While the camera is accessing the card or built-in memory (for an operation
such as picture writing, reading, deleting, or formatting), do not turn off the
camera or remove the battery, card, AC adaptor (supplied).
●
The data on the built-in memory or the card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of the camera or the
card. We recommend storing important data on a PC etc.
●
Do not format the card on your PC or other equipment. Format it on the
camera only to ensure proper operation.
10
VQT5E54 (ENG)
Standard accessories
Check that all the accessories are supplied before using the camera. Part
numbers are as of January 2014. These may be subject to change.
Battery pack
DMW-BCM13PP
Charge the battery
before use.
Battery pack is indicated as
battery pack or battery in the text.
AC adaptor
VSK0768
Hand strap
VFC4297
USB connection cable
K1HY08YY0031
CD-ROM
VFF1254
Software:
Use it to install the software on
your PC.
Owner’s Manual for advanced
features
SD Memory Card, SDHC Memory Card and SDXC Memory Card are
indicated as card in the text.
Cards are optional. You can record or play back pictures on the built-in
memory when you are not using a card.
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended) can
be used.
SD Memory Card (8 MB to 2 GB) / SDHC Memory Card (4 GB to 32 GB) /
SDXC Memory Card (48 GB, 64 GB)
For information about optional accessories, refer to the “Digital Camera
Accessory System”.
If accessories are lost, customers can visit us at www.panasonic.com/support
for further information about obtaining replacement parts.
Please dispose of all packaging appropriately.
Keep small parts in a safe place out of the reach of children.
The illustrations and screens in this manual may differ from the actual product.
SILKYPIX Developer Studio SE is not provided on the supplied CD-ROM.
Download this software from the website and install it on your computer to
use. (
→
34)
