55
SQW0550
Basics
Buttons/Dials/Levers Used for Recording
Enabling/disabling the histogram display
→
[Custom
] → [
Histogram
] → [
ON] / [OFF]
When set to [ON], you can move the display position of the histogram by pressing .
•Direct touch operation is also possible from the recording screen.
Displays distribution of brightness in picture – e.g.
if the graph peaks at the right, this means there are
several bright areas in the picture. A peak in the centre
represents correct brightness (correct exposure). This
can be used as a reference for exposure correction, etc.
(Example)
Dark
← OK →
Bright
●
When the histogram is not the same as that of the recorded picture under the following
conditions, histogram will be displayed in orange:
•When manual exposure assist indicates settings other than [
] in Manual Exposure Mode
or during Exposure Compensation.
•When the flash fires.
•When the correct exposure is not achieved or when the brightness of the screen cannot be
displayed accurately in a dark location.
●
The histogram is different from those displayed using the image editing software of a computer.
Enabling/disabling the guideline display
→
[Custom
] → [
Guide Line
] → [
] / [ ] / [ ] / [OFF]
•The guideline is not displayed during panorama picture recording.
When you select [ ], you can move the position of the guideline by pressing .
•You can also set the position directly by touching [ ] on the guideline of the recording
screen.
