manualshive.com logo in svg

Panasonic DMC-SZ1GKDMC-SZ1GN, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DMC-SZ1GKDMC-SZ1GN Скачать руководство пользователя страница 33

33

9.3.

Details of Electrical Adjustment

9.3.1.

How to execute the Electrical Adjustment

It is not necessary to connect the camera to a PC to perform adjustments.
“Flag reset operation” and “Initial setting operation” are required when carrying out the alignment, follow the procedure below.

9.3.1.1.

Startup Electrical Adjustment mode

1. Release the initial settings.
2. Insert a recordable SD card.

(Without a SD card, the automatic adjustment can not
executed.)

3. Procedure to set the camera into adjustment mode:

a. Set the REC/PLAY switch to “[ REC ] (Camera mark)”,

and then turn the Power on.

b. Press the [ MODE ] button, and select the [ NORMAL

PICTURE ] mode by Cursor button, then press the 
[ MENU/SET ] button.

c. Set the REC/PLAY switch to “[ REC ] (Camera mark)”,

and then turn the Power off.

d. Turn the Power on pressing [ MENU/SET ] and 

[ MOTION PICTURE ] simultaneously.
LCD monitor displays “SERVICE MODE”.(Refer to
Fig. 3-1)

9.3.1.2.

Status Adjustment Flag Setting

Reset (Not yet adjusted) the status flag condition.

1. After pressing the [ DISP. ] button, the LCD monitor dis-

plays the Flag status screen (Refer to Fig.3-2)

2. Select item by pressing the Cursor buttons. (Gray cursor

is moved accordingly.)

3. Press the [ Q.MENU ]/[ (Delete/Cancel) ] button.

NOTE:

The selected item's flag has been changed from 
“F (green)” to “0 (yellow)”.

*Flag conditions:
F (green)
means that the alignment has been completed and the
status flag condition is set. In this case, the flag condition
should be reset, if you try to carry out the automatic align-
ment.
0 (yellow)
means that the alignment has been not “completed” and
the status flag condition is “reset”. In this case, automatic
alignment is available.

• In case of setting the status flag into set condition again without completion of the alignment, the status flag should be SET by

using PC, or UNDO by using ROM BACKUP function.

Содержание DMC-SZ1GKDMC-SZ1GN



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды