58
Using the Conversion Lens
Using the tele conversion lens (DMW-LT52,
optional), it is possible to zoom in much more;
using the wide conversion lens (DMW-LW52,
optional), it is possible to widen much more.
(When attaching the conversion lens, the
Close-up lens (DMW-LC52, optional) or MC
protector (DMW-LMC52; optional) to the
camera, the conversion lens adaptor
(DMW-LA1) is necessary)
1
Remove the lens ring.
2
Attach the conversion lens adaptor
1
.
3
Install the tele conversion lens
B
or
the wide conversion lens
A
.
• When attaching the tele conversion lens and
rotating the zoom lever towards W, a vignetting
effect occurs. Only rotate towards T.
• When using the conversion lens, set the built-in
flash to forced OFF.
• When attaching the conversion lens, use the
LCD monitor.
• To prevent the lens from being stained with water
or oil, attach both the optional conversion lens
adaptor and the optional MC protector to protect
the lens.
• For further information, read the conversion lens
operating instructions.
KC3‑PP.book 58 ページ 2002年4月5日 金曜日 午前11時55分