
Others
128
VQT1G28
Using the AC Adaptor
You can use the camera without worrying
about battery discharge when it is
connected to a PC or a printer if you use
the DC cable (DMW-DCC1; optional) to
connect the camera to the battery charger/
AC adaptor (supplied) and connect the AC
cable.
• Check that the camera is turned off.
• Close the flash.
1
Connect the AC cable.
2
Connect the DC cable
A
.
•
Pull open the DC cable cover
1
and
then connect the DC cable to the
camera body using the same steps as
“Inserting/Removing the Battery” (P21).
Pull the DC cable through the opening
as shown in the illustration and then
close the battery door.
•
Be careful not to catch the DC cable
when closing the battery door.
•
You cannot charge the battery if you
connect the DC cable (DMW-DCC1;
optional).
• Be sure to use the supplied AC cable and
the prescribed DC cable (DMW-DCC1;
optional) when using the battery charger/
AC adaptor (supplied) as an AC adaptor.
• The camera becomes warm during use.
This is not a malfunction.
• Disconnect the charger/AC adaptor and
DC cable when the camera is not in use.
• The unit is in the standby condition when
the AC adaptor is connected. The primary
circuit is always “live” as long as the AC
adaptor is connected to an electrical
outlet.
1
A
VQT1G28ENG_L10KP.book 128 ページ 2007年9月6日 木曜日 午前9時29分
Содержание DMC-L10K - Lumix Digital Camera SLR
Страница 156: ...Others 156 VQT1G28 Others MEMO ...
Страница 157: ...Others 157 VQT1G28 ...