Panasonic DMC-GF3CEB Скачать руководство пользователя

Страница: 62 / 77

S5. Replacement Parts List

S-11

Note:

1. * Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE

Components identified with the mark

have the special characteristics for safety.

When replacing any of these components, use only the same type.

3. Unless otherwise specified,

All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.

4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation

of this assembly in production, it will no longer be available.

5. Supply of CD-ROM, in accordance with license protection, is allowable as replacement parts

only for customers who accidentally damaged or lost their own.

E.S.D. standards for Electrostatically Sensitive Devices, refer to PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES
section.

About LENS MAIN BLOCK UNIT (Ref.302 and 408)

1. In case of the LENS MAIN BLOCK UNIT (Ref.302 and Ref.408) defects, contact to

the service department of sales company.

Definition of Parts supplier:

1. Parts marked with [ENERGY] in the remarks column are supplied from Panasonic

Corporation Energy Company.

2. Parts marked with [PAVCSG] in the remarks column are supplied from PAVCSG.

Others are supplied from AVC-CSC-SPC.

Содержание DMC-GF3CEB














































































Результаты поиска

Содержание DMC-GF3CEB

Отзывы:

Похожие инструкции для DMC-GF3CEB

Бренды по названию

Популярные бренды

Panasonic DMC-GF3CEB, Руководство по обслуживанию

Результаты поиска

Содержание DMC-GF3CEB

Отзывы:

Похожие инструкции для DMC-GF3CEB

Бренды по названию

Популярные бренды