Basic
- 34 -
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] Mode
menu.
•
Set the drive mode to [
] by pressing
4
(
).
Set [REC] Mode to [
].
•
For details on setting up [REC] Mode, refer to
P30
.
Note
•
To change the setting while taking pictures, refer to
“
Using the [REC] Mode Menu
”
(P129)
or
“
Using the [CUSTOM] Menu
”
(P142)
.
•
The shutter speed is automatically set between about 30 seconds and 1/4000th of a second in
the following cases.
–
When the [SENSITIVITY] is set to [ISO100].
–
When the aperture value is set to F2.5 [when the interchangeable lens (H-H014) is attached].
–
When the aperture value is set to F3.5 [when the interchangeable lens (H-FS014042) is
attached].
Taking Pictures with Your Favorite Settings
(Program AE Mode)
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
•
Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not achieved,
except when set to flash.)
•
You will not be able to take a picture until the
focus is set, since the [FOCUS PRIORITY]
(P144)
is set initially to [ON].
Press the shutter button fully (push it in
further), and take the picture.
•
The access indication lights
(P25)
red when pictures
are being recorded on the card.
AB